| Laser Jet 1000/1200 |
Heating element(220V) |
RG9-1494-000 |
| Laser Jet 1000/1200 |
Heating element(110V) |
RG9-1494-000 |
1) Product Name:Heating elements/Ceramic elements
2) Origin:China
3) Uesd for HP1000/ 1200/ 1300/ 1010/ 2300/ 1320/ 1160/ 4000/ 4100 and so on,110V
and 220V available.
The following procedure can help you to replace a H/E in good condition.
a ,Confirm the voltage rating (about 220 volts or 110 volts),the both H/E are not substitutive each other,otherwise it will crack or the printer can not work.
b ,Remove the used H/E and clean out the used glue.then wipe up the heating core with alcohol.
c , Daub some glue(LS-A suggested) on the convexity in theslot of the heating core.
d ,Release the protecting film from the new H/E, then fit the H/E into the slot in the correct direction ,and press it tightly but tender avoiding to damage it
lay up heating core with new the H/E for 10 minutes at least before next operation.
